Your Position: Home > Bag Growth System > Crusher Machine > Straw Crusher Machine
Straw Crusher Machine
Straw Crusher Machine
Straw Crusher Machine
Straw Crusher Machine
Straw Crusher Machine
Straw Crusher Machine
Straw Crusher Machine
Straw Crusher Machine

Straw Crusher Machine

In whole crusher machine, different material will request for crusher machine model. So there aresawdust crusher machine, corncob crusher machine and straw crusher machine etc.For crusher machine capacity, it will be based on your actual demand.As usal,700kg/hour, 1000kg/hour and 2000kg/hour etc.
Efficiency: 400 kg/h
Power: 1.5 kw
Size: 60*40*70 cm
Weight: 50kg
Brief Introduction
Parameters
Application
Package
Shipping
Related
Inquiry
Introduction
Straw Crusher Machine

This biomass hammer mill is mainly component of casing, rotor, hammers and bars. The case is divided into two parts: up and down, which is connected by welding the cut steel; other parts are connected by screws. The one inside of case is high manganese steel lining board, which is easy to change when wore out. There are several hammers in the spindle, which make up of rotor together with turntable and wear hammer shaft. It works through motor and V-belt to drive spindle and rotor rotating, so that centrifugal force producing by the hammer rotating spread out. Then when the big material was put into crushing chamber, it was crush by the high speed hammer. Afer those process, the standard material was screen out by down bar and non-standard one was left on the crushing chamber and crush again. In order to avoid clogging, humidity of crushed material should below 10%-15%.

Straw Crusher Machine
parameters
Product Parameters
Model Efficiency Power Size(cm) Weight
ST01 400 kg/h 1.5kw/1phase 60*40*70 cm 50kg
ST02 800 kg/h 2.2kw/1phase 94*50*95 cm 85kg
ST03 1500 kg/h 4kw/3phase 105*188*229 cm 130kg
ST04 4000 kg/h 11kw/3phase 174*158*232 cm 470kg
application
Product Application
The main function of the crusher is to pretreat raw materials. The pretreatment of raw materials is mainly the pretreatment of main ingredients. During the cultivation of edible fungi, the size of the raw material particles must be moderate. On the one hand, it is to ensure air permeability and water absorption; on the other hand, it is not to scratch the bag. Particles that are too large or too small will affect mycelial growth. If the particles are too large, the gaps between the cultivation materials will be enlarged, which will greatly reduce the water absorption of the cultivation materials. The cultivation materials will easily dry up and can also puncture the plastic bags. The particles are too small, the gaps between the cultivation materials are too low, and there is a lack of oxygen. The mycelium grows slowly and enters the extended physiological maturity period, and the cultivation cycle is extended.
For different raw materials, the crushing principles are different. Then there are wood chip grinders, corn cob grinders and straw grinders.
Package
Packaging Display
Shipping
Safe Transportation
Safe Transportation
Safe Transportation
Safe Transportation
Relevant
Recommend Relevant Products
ONLINE SERVICE
Your Satisfaction Is Our Successe
If you are looking for related products or have any other questions please feel free to contact us.You can also give us a message below , we will be enthusiastic for your service.

    Name

    *E-mail

    *Phone

    Company

    *Inquiry

    X

      Name

      *E-mail

      *Phone

      Company

      *Inquiry